EP Efflorescence Remover
Scientifically Designed to Remove White Salts Stains
Efflorescence is one of the most troublesome problems that homeowners and contractors face.
The unsightly white powder from excessive salts on masonry such as brick, blocks, plastering, natural stone and concrete are typically exceedingly difficult to remove.
EP Efflorescence Remover is fantastic for removing the white salt stains from masonry.
You won’t believe how easy it comes off!
Supplied as a Ready-To-Use product, just spray or brush onto walls or floors giving a slight scrub and wash away with clean water. It’s that easy!
EP Efflorescence Remover is 100% eco-friendly, non-toxic, non-flammable & biodegradable.
Did you know Efflorescence is usually a sign of water penetration into the masonry? This will cause major problems in the future.
For a full run-down on how to remove Efflorescence and, most importantly, how to stop it coming back …Get in Touch with Us : firstname.lastname@example.org
THREE EASY STEPS:
Brush off loose efflorescence and remove hard efflorescence as much as possible. We need the product to do the work.
Spray or brush on EP Efflorescence Remover. Spreading the product over all surfaces. Stubborn areas may require agitation with a hard bristle brush. Leave for 10 minutes but don’t let it dry on, so you need to keep an eye on things.
Spray lots of water* washing away all the efflorescence.
TIP: When cleaning vertical surfaces, always start at the bottom working your way to the top. The same applies for washing with water. Start at the bottom. Also don’t forget to wear goggles and gloves, its always a good thing.
Lets Get You Started !
Your Partner in cleaning.
Columns & beams
Natural stone structures
Cement block walls